Brother Innov-is 2500D, Operation Manual

Page: 192 / 221

USING STORED CUSTOM STITCHES
MY CU
ST
OM ST
IT
CH
191
7
USING STORED CUSTOM STITCHES
Storing Custom Stitches in Your List
Stitch patterns created using the MY CUSTOM
STITCH™ function can be stored for later use. Once
you finish entering the stitch data, press . The
“Saving” screen appears and the stitch will be stored in
the machine’s memory.
Before storing a custom stitch, press to sew a
test-run of the stitch.
■
If the Memory Is Full
If the following message appears after is
pressed, the stitch pattern cannot be stored because
either the machine’s memory is full or the stitch
pattern being stored is larger than the amount of
space available in the memory. To be able to store
the stitch pattern in the machine’s memory, a
previously stored stitch pattern must be deleted.
Retrieving Stored Custom Stitches
a
Press .
→
A list of stored stitch patterns is displayed.
Note
Do not turn off the machine while the “Saving” screen
is displayed, otherwise you may lose the custom
stitches that you are saving.
Memo
• It takes a few seconds to save a custom stitch in the
machine’s memory.
• See page 115 for information on retrieving a saved
stitch pattern.
Note
To save custom stitches to USB media or the
computer, refer to “Saving the Retrieved Custom
Stitches to USB Media/Computer” on page 192.