Brother Innov-is 2500D Operation Manual Download

Page: 176 / 221

EDITING PATTERNS

de
ry

175

If necessary, press

to change the

thread color display (see “Changing the
Thread Color Display” on page 151).

Thread color display

→

The thread color display changes to name of color.

Press

to put the color you

want to change at the top of the sewing order.

Press

color

palette

or .

Color palette

→

A cursor appears on the color palette.

Press

to choose a new color

from the color palette.

* You can scroll through 25 colors at a time using

and .

* To return to the original color, press

. If

multiple colors have been changed, this command
will return all colors to their original colors.

* You can select colors from the color palette by

directly touching the color palette with the touch
pen.

Color palette

→

The selected color appears at the top of the sewing
order.

Press .

Color palette/Custom thread table change key

→

The display shows the changed colors.

Memo

To select a color from the Custom Thread Table, see
“Choosing a Color from the Custom Thread Table” on
page 177.

Summary of Contents for Innov-is 2500D






























































































































































































































Search results

Summary of Contents for Innov-is 2500D

Reviews:

Related manuals for Innov-is 2500D

Brands by name

Popular brands

Brother Innov-is 2500D, Operation Manual

Search results

Summary of Contents for Innov-is 2500D

Reviews:

Related manuals for Innov-is 2500D

Brands by name

Popular brands