Brother HL-L6400DW Online User'S Manual Download Page 300

Page: 300 / 382

Home >

Routine Maintenance

Clean the Machine

> Clean the Corona Wire

Clean the Corona Wire

If you have print quality problems or the control panel displays

[Drum !]

status, clean the corona wire.

1. Open the front cover.

2. Remove the toner cartridge and drum unit assembly from the machine.

3. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left

several times.

Be sure to return the tab to the Home position (

). The arrow on the tab must be aligned with the arrow on

the drum unit. If it is not, printed pages may have a vertical stripe.

4. Install the toner cartridge and drum unit assembly back into the machine.

5. Close the front cover of the machine.

Related Information

•

Clean the Machine

•

Error and Maintenance Messages

295

Summary of Contents for HL-L6400DW






























































































































































































































































































































































































Search results

Summary of Contents for HL-L6400DW

Reviews:

Related manuals for HL-L6400DW

Brands by name

Popular brands

Brother HL-L6400DW, Online User'S Manual

Search results

Summary of Contents for HL-L6400DW

Reviews:

Related manuals for HL-L6400DW

Brands by name

Popular brands