manualshive.com logo in svg

Brother HL-L6400DW, Online User'S Manual

Share
Download
Brother HL-L6400DW Online User'S Manual Download Page 313

6. Install only the drum unit back into the machine.

7. Close the front cover.
8. Put the machine into the bag it originally came in.
9. Pack the machine, the printed materials, and the AC power cord (if applicable) in the original carton with the

original packing material as shown. If you are returning your machine to Brother as part of the Exchange
Service, pack only the machine. Keep all separate parts and printed materials to use with your "Exchange"
machine.

10. Close the carton and tape it shut.
11. If you have a Lower Tray, repack it as shown.

308

Summary of Contents for HL-L6400DW































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands