Brother HL-3450CN Series, Service Manual

Page: 51 / 365

HL-3450CN SERVICE MANUAL
3-13
3.4.2 Install the envelope adapter
NOTE:
The specification of envelopes feedable from the envelope adapter are as follows;
x
Capacity: 15 envelopes
x
Size: DL (110 x 220 mm), #10 (105 x 241 mm)
(1) Prepare the media cassette and
envelope adapter.
(2) Put the adapter on the cassette base
and engage the hooks provided on the
leading edge of the adapter (left and
right) into the cassette base.
Fig. 3-19
(3) Move the envelope guide to meet the
adapter base.
Fig. 3-20
(4) Move the paper guides to meet the
desired envelope size.
(5) Load the envelopes into the adapter.
PRECAUTION
Do not load media in the adapter higher
than the specified capacity limit,
otherwise it may result in paper feed
jams or print quality problems.
Fig. 3-21
CAUTION
When removing the envelope adapter from the media cassette, pull the adapter toward you
while holding the trailing edge of the adapter up approximately 10mm.
Do not hold up the trailing edge of the adapter by force, otherwise it may result in damage to
the hooks provided at the leading edge of the adapter.
Fig. 3-22
Cassette base
Envelope adapter
Adaptor base
Envelope guide
Paper guide
Paper guide
Envelope adaptor
Cassette base
Cassette base
Hook