Brother HL-3450CN Series Service Manual Download Page 141

Page: 141 / 365

CHAPTER 5 CONTROL PANEL OPERATION

5-16

Code No.

LCD Message

Description of Message

12-2

STACKER FULL

12 STACKER FULL

[*4]

The engine is ready to print.

The Power LED is lit.

Remove the paper on the stacker
(paper exit tray), then press the -
button.

REPLACE TONER

13 REPLACE [*5]

TONER [*4]

Display of [4]:

C:YT Y toner cartridge

C:CT: C toner cartridge

C:MT M toner cartridge

C:KT K toner cartridge

The engine is ready to print.

The Power LED is lit.

[*5]: The toner empty condition is

indicated by the color code as
follows;

Yellow

Magenta

Cyan

Black

Replace the indicated toner cartridge
with a new one of the correct color.

14-1

CHECK FUSER OIL

14 CHECK

FUSER OIL[*F0]

The engine is idling.

The Power LED is lit.

Replace the fuser oil bottle with a new
one.

This message will be automatically
cleared by opening & closing the
paper exit cover.

14-2

CHECK CLEANING ROLLER

14 CHECK CLEANING

ROLLER[*4][*FC]

The engine is idling.

The Power LED is lit.

Replace the fuser cleaner with a new
one.

Execute the Clear Care Mode after
the replacement of the fuser cleaner
to clear the Care Code [FC].

14-3

CHECK WASTE TONER PACK

14 CHECK WASTE

TONER PACK[*4]

The engine is idling.

The Power LED is lit.

Replace the waste toner pack with a
new one.

This message will be automatically
cleared by opening & closing the front
cover while replacing the waste toner
pack. The message can also be
cleared by pressing the - button.

Summary of Contents for HL-3450CN Series














































































































































































































































































































































































Search results

Summary of Contents for HL-3450CN Series

Reviews:

Related manuals for HL-3450CN Series

Brands by name

Popular brands

Brother HL-3450CN Series, Service Manual

Search results

Summary of Contents for HL-3450CN Series

Reviews:

Related manuals for HL-3450CN Series

Brands by name

Popular brands