Brother 884-T13 Operation Manual Download Page 312

Page: 312 / 316

310

Upgrade procedure using
computer

For computers and operating systems, see
“Connecting your machine to the PC” on
page 148.

While pressing the automatic threading
button, turn the main power to on.

→

The following screen will appear on the LCD.

Touch .

Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine.

→

“Removable Disk” will appear in “Computer (My
computer)”.

Copy the upgrade file to “Removable Disk”.

Touch .

→

The upgrade file is downloaded.

Unplug the USB cable, and turn the
machine off and on again.

Note

• Do not connect any additional USB media

devices to your computer when using the
USB cable.

Note

• If an error occurs, a red text error message

will appear. When the download is
performed successfully, following message
will appear.

Summary of Contents for 884-T13





























































































































































































































































































































Search results

Summary of Contents for 884-T13

Reviews:

Related manuals for 884-T13

Brands by name

Popular brands

Brother 884-T13, Operation Manual

Search results

Summary of Contents for 884-T13

Reviews:

Related manuals for 884-T13

Brands by name

Popular brands