Brother 884-T13 Operation Manual Download Page 217

Page: 217 / 316

SELECTING/EDITING/SAVING PATTERNS

215

Rotate the pattern, and then touch

Press

to display the embroidering

settings screen.

Press .

Refer to steps

through

of Connecting

three patterns to embroider the first
pattern.

Select the next pattern, and then touch

Press

in the pattern editing screen.

Rotate the pattern to the same angle as the
first pattern, and then touch

Press .

Touch the position for the second pattern
will be connected on the screen, and then
touch .

Touch the connecting area

→

Message appears on screen and carriage will move

after pressing

Continue with step

of Connecting three

patterns to finish connecting the patterns.

Note

• Be sure to rotate the pattern from the

editing screen. The reference edge and
reference point are specified along the
smallest rectangle (not angled) that contains
all patterns selected.

Rectangles and angled patterns

Rectangle

Rectangles and patterns (not angled)

Rectangle

• Pressing

in the embroidering settings

screen changes the angle at which patterns
are connected.

Summary of Contents for 884-T13





























































































































































































































































































































Search results

Summary of Contents for 884-T13

Reviews:

Related manuals for 884-T13

Brands by name

Popular brands

Brother 884-T13, Operation Manual

Search results

Summary of Contents for 884-T13

Reviews:

Related manuals for 884-T13

Brands by name

Popular brands