Brother 884-T13 Operation Manual Download Page 157

Page: 157 / 316

SELECTING/EDITING/SAVING PATTERNS

155

Select a pattern.

Touch the desired pattern.

→

The selected frame pattern appears in the pattern
display area.

• If the wrong pattern was selected or you wish to select

a different pattern, touch the desired frame pattern.

Touch .

This confirms the frame selection.

→

The pattern editing screen appears.

Alphabet patterns

There are 37 built-in character fonts.

Example: Entering “Lucky Color”.

Touch .

→

The font selection screen appears.

Select a character font.

Touch the desired character font.

• Touch

for additional selections.

→

The text input screen appears.

Memo

• Due to size or shape, some frame patterns

cannot be used with the

design.

• The frame patterns are just some of the

patterns that can be used. Character
patterns other than the 3-letter monogram
patterns can be used in the combination.

Summary of Contents for 884-T13





























































































































































































































































































































Search results

Summary of Contents for 884-T13

Reviews:

Related manuals for 884-T13

Brands by name

Popular brands

Brother 884-T13, Operation Manual

Search results

Summary of Contents for 884-T13

Reviews:

Related manuals for 884-T13

Brands by name

Popular brands