Brother 884-T13 Operation Manual Download Page 207

Page: 207 / 316

SELECTING/EDITING/SAVING PATTERNS

205

After reducing the pattern, touch

return to the pattern editing screen.

• To adjust other parts of the pattern, touch

and

again, and then adjust the pattern as desired.

• If it is difficult to view the text and the pattern, touch

to enlarge the pattern and then touch

preview.

After finishing all editing, touch

and

then .

→

The embroidering settings screen appears.

• To return to the pattern editing screen and continue

editing the pattern, touch

Memo

• Touch

to group this combined pattern.

(Refer to “Grouping multiple selected
patterns” on page 176.)

Summary of Contents for 884-T13





























































































































































































































































































































Search results

Summary of Contents for 884-T13

Reviews:

Related manuals for 884-T13

Brands by name

Popular brands

Brother 884-T13, Operation Manual

Search results

Summary of Contents for 884-T13

Reviews:

Related manuals for 884-T13

Brands by name

Popular brands