170
Embroidering using the Link
function
First, use the embroidery editing software to create
the embroidery pattern to be sent to the
embroidery machine.
a
Touch
, and then touch
and
to
display page 5 of the settings screen.
b
Touch
to enable the Link function.
→
When the following message appears, touch
.
c
Turn off the machine.
d
Use the included USB cable to connect the
embroidery machine to the computer.
• When connecting the embroidery machine to the
computer, be sure to use the included USB cord
clamps. For details on using the USB cord clamps,
refer to page 163.
e
Turn on the machine.
f
Using embroidery editing software
provided with the Link function, such as PE-
DESIGN NEXT or later from a computer,
send the embroidery pattern to the machine
in the Link mode.
Note
• Embroidery data in the PES format (.pes)
and the PEN format (.pen) can be
embroidered using the Link function.
• The Link function cannot be used with
large-size (split) embroidery patterns or
embroidery patterns for the jumbo frame
(optional).
• Attach to the embroidery machine the
embroidery frame for the size of the pattern
to be sent.