Brother 882-W70, Operation Manual, Page: 41 / 212

WINDING/INSTALLING THE BOBBIN
G
etting
Re
ad
y
39
1
d
Slide the spool cap onto the spool pin as far as possible
to the right, with the rounded side on the left.
e
While holding the thread with both hands, pass the
thread through grooves of the thread guide plate.
1
Thread guide plate
f
Pass the thread through the thread guide.
1
Thread guide
g
Pass the thread around the pretension disk making sure
that the thread is under the pretension disk.
Pull the thread as far as possible.
1
Pretension disk
2
Thread guide
h
Follow steps
g
through
j
on page 37 through
page 38.
■
Using the Spool Stand (Included with Some
Models)
To wind thread on the bobbin while the spool stand is
installed, pass the thread from the spool through the
thread guide on the telescopic thread guide, and then
wind the bobbin according to steps
e
through
j
of
“Using the Supplemental Spool Pin”on page 37 to
page 38.
a
a
a b
CAUTION
• When winding thread on the bobbin, do not
cross the bobbin winding thread with the
upper thread in the thread guides.