manualshive.com logo in svg

Brother 882-W70, Operation Manual, Page: 126 / 212

Share
Download
Brother 882-W70 Operation Manual Download Page 126

EDITING COLORS

124

[Manual] setting for [Gradient]

You can select one color to be used in the [Gradient] effect.
The effect will be created with a color you select.

1

Select a color from the palette.

2

Selected color is displayed.

f

Press .

g

Select the color scheme from samples.

*

Press 

 to add the new schemes.

1

Press to review the previous schemes.

h

Select the displayed color scheme.

*

 : Return to the previous screen.

*

 or 

 : Display the other color schemes.

*

 : Select the displayed color scheme.

The thread color palette screen will appear.

Thread Color Sorting

This function allows you to embroider while replacing 
the thread spool a minimal number of times.

Before starting to embroider, press 

 in the 

embroidery screen to rearrange the embroidery order 
and sort it by thread colors.

1

2

1

Memo

• To temporarily register your favorite schemes, 

press 

 (to release your favorite schemes, press 

 again). 9 color schemes can be added. Press 

 to check the registered favorite 

schemes. 

To cancel the registration, press 

.

Note

• Maximum 20 pages of schemes can be reviewed.

Summary of Contents for 882-W70





















































































































































































































Reviews:

No comments