Brother 882-T51 Operation Manual Download

Page: 64 / 192

Understanding the pattern list screen

In this screen, select the pattern.

Some patterns cannot be edited with

No.

Display

Function

Page

Key Name

Shows the size of the

embroidery pattern currently

displayed in the pattern

display area. The top value

shows the height and the

bottom value shows the

width. If the embroidery

pattern consists of multiple

patterns that have been

combined, the size of the

entire pattern, including all

patterns, is shown.

Pattern size

Pattern

display area

This area displays the

selected pattern.

Embroidering

area line

Shows the embroidering

area for the large

embroidery frame. The

embroidery frame

indications, the grid lines

and other display settings

can be specified from the

machine settings screen.

p. 144

An image of the pattern

appears on the key. Touch

the image to select the

pattern.

p. 106

Pattern keys

Displays an image of the

pattern that is to be

embroidered so it can be

previewed.

p. 41

Preview key

Shows the number of the

currently displayed page

and the total number of

pages.

Page

Touch this key to display the

previous page.

p. 106

key

Touch this key to display the

next page.

p. 106

Next page key

Flips the pattern

horizontally.

p. 121

Horizontal

mirror image

key

Touch after selecting the

pattern. The selection of the

pattern is confirmed and the

pattern editing screen

appears.

p. 106

Set key

Allows the size of the

currently selected

embroidery pattern to be

changed.

p. 109

Size key

Touch to leave the currently

selected pattern category

and choose a different

category. Returns to the

pattern type selection

screen.

p. 106

Return key

No.

Display

Function

Page

Key Name

Summary of Contents for 882-T51

































































































































































































Search results

Summary of Contents for 882-T51

Reviews:

Related manuals for 882-T51

Brands by name

Popular brands

Brother 882-T51, Operation Manual

Search results

Summary of Contents for 882-T51

Reviews:

Related manuals for 882-T51

Brands by name

Popular brands