Brother 882-T51, Operation Manual

Page: 150 / 192

148
Selecting the “Eco Mode” or
“Shutoff Support Mode”
You can save the machine power by setting the
eco mode or the shutoff support mode.
If you leave the machine without using for a
specified period of time, the machine enters in one
of these modes.
“Eco Mode” ;
Machine will enter a sleep mode. Touch the
screen or “Start/Stop” button to continue
embroidering.
“Shutoff Support Mode” ;
Machine will turn off after set period of time. Turn
machine off and then back on to restart
embroidering.
Press the “Start/Stop” button or touch the screen
display to recover from these modes.
These settings can be specified from page 3 of the
settings screen.
a
Use or to select the time until
entering the mode.
Setting the opening screen
You can select the initial screen of the machine. If
you set the “Opening Screen” to “ON”, the
opening movie screen starts when the machine is
turned on. The initial pattern type selection screen
appears after touching the screen.
If you set the “Opening Screen” to “OFF”, the
initial pattern type selection screen appears when
the machine is turned on.
When the embroidery machine is purchased,
“ON” is selected.
The opening screen setting can be set from page 3
of the settings screen.
a
Touch or to select the desired
setting.
Changing the language
The language setting can be specified from page 3
of the settings screen.
a
Touch and to select the desired
language.
The desired language is displayed.
Condition Eco Mode Shutoff Support
Mode
Available time OFF, 0 - 120 (minute) OFF, 1 - 12 (hour)
“Start/Stop” button Green flashing Green slow flashing
Suspended function Machine light,
Screen display, LED
pointer
All functions
After recovering The machine starts
from the previous
operation. You need to turn off
the machine.
Note
• If you turn off the machine while the
machine is in the “Eco Mode” or the
“Shutoff Support Mode”, wait for about 5
seconds before turning on the machine
again.