Brother 882-T51 Operation Manual Download

Page: 117 / 192

SELECTING/EDITING/SAVING PATTERNS

115

Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine.

The USB cable can be plugged into the USB ports
on the computer and embroidery machine whether
or not they are turned on.

USB port for computer

USB cable connector

→

The “Removable Disk” icon will appear in
“Computer (My Computer)” on the computer.

Turn on your computer and select
“Computer (My Computer)”.

Touch

when the pattern you want to

save is in the embroidering screen.

Touch .

Touch

to return to the original screen without

saving.

→

The pattern will be temporarily saved to
“Removable Disk” under “Computer (My
Computer)”.

Select the pattern’s .phc file in “Removable
Disk” and copy the file to the computer.

Retrieving patterns from the
machine’s memory

Press .

→

The machine displays the patterns currently in the
memory.

Note

• The connectors on the USB cable can only

be inserted into a port in one direction. If it
is difficult to insert the connector, do not
insert it with force. Check the orientation of
the connector.

• For details on the position of the USB port

on the computer (or USB hub), refer to the
instruction manual for the corresponding
equipment.

Summary of Contents for 882-T51

































































































































































































Search results

Summary of Contents for 882-T51

Reviews:

Related manuals for 882-T51

Brands by name

Popular brands

Brother 882-T51, Operation Manual

Search results

Summary of Contents for 882-T51

Reviews:

Related manuals for 882-T51

Brands by name

Popular brands