© 2018 BROSA AG, Tettnang, Germany
7 / 40
0656 FlexLim (Safe) system V1.00
...............................................................................................................................................................
...............................................................................................................................................................
............................................................................................................................................................
............................................................................................................................................................
1.3 Warnings and important information
Depending on the individual configuration, some systems can also be
equipped with a 230V AC power supply (details can be found in the system
documentation). This is indicated by a corresponding warning symbol on the
voltage transformer and the relays. Although these parts are protected against
direct contact, special caution should be exercised near them.
1.4 Purpose of the system
The BROSA 0656 electronic system is an overload protection and weighing
system for crane systems, an important aid for the operation of cranes. The
device provides the operating staff with all the information required for safe
operation within target values when lifting. The system is designed and
constructed to comply with all applicable safety standards.
The system may not be used for purposes other than those mentioned above.
Improper use of the system endangers the life of the operating staff and other
persons and may result in damage to the machine or property.
It is crucial that the system is always in perfect condition. In systems that consist
of a large number of electronic and mechanical components, the occurrence of
errors can never be completely ruled out. Such errors constitute a potential
security risk and must therefore be remedied promptly by qualified technical
staff.
An overload protection system is no substitute for good judgement, for
experienced operating staff or for the necessary safety regulations during
operation and the system should therefore also not be misused for this purpose.
1.5 Qualification and responsibility of the operating staff
To ensure safe operation of the system and crane, calibration and adjustment
of the system by a qualified technician is mandatory. The technician must meet
the following requirements:
DANGER
WARNING
