© 2018 BROSA AG, Tettnang, Germany
15 / 40
0656 FlexLim (Safe) system V1.00
...............................................................................................................................................................
...............................................................................................................................................................
............................................................................................................................................................
............................................................................................................................................................
Press the "ENTER" key. The menu then scrolls to the "select" option and a "1"
is displayed in the first input field.
You can change this value to that of the menu to be selected by pressing the
corresponding arrow keys (up or down).
Press the "ENTER" key to confirm your selection.
If the selected menu is incorrect, press the "ESC" key to return to the previous
menu.
Entering a parameter value
Press the "ENTER" key. A "1" is displayed as a default in the first input field.
Change this by pressing the up and down arrow keys on the first digit of the
parameter value.
The arrow key to the right moves the cursor to the next input field and a preset
"1" is displayed.
Repeat this process with the remaining digits.
The left and right arrow keys can be used to move between the input fields.
Press the "ENTER" key to confirm the input value.
If you do not want to change the parameter value, press the "ESC" key to exit
value entry and go to the next parameter or return to the previous menu.
Display set-up
From display software V1.0.2, there is a "Set-up menu" to select the following:
Display test
Baud rate selection
Bootloader mode
OK
OK
OK
OK
