Brooks Instrument SLA5840, Installation And Operation Manual

Page: 10 / 62

1-4
Brooks
®
Model SLA5840
Section 1 Introduction
Installation and Operation Manual
X-PR-SLA5840-Series-RevB-RT-eng
Part Number: 541B201AAG
October, 2017
Table 1-3 SLA5840 Series Communication Protocols
Communication Protocol Communication Protocol Communication Protocol Communication Protocol Communication Protocol
RS485 RS485 RS485 RS485 RS485 Profibus Profibus Profibus Profibus Profibus ® ®
® ® ®
DeviceNet DeviceNet DeviceNet DeviceNet DeviceNet ® ®
® ® ®
*** *** *** *** ***
Electrical Connection (SLA58xx) Electrical Connection (SLA58xx) Electrical Connection (SLA58xx) Electrical Connection (SLA58xx) Electrical Connection (SLA58xx) 1 x 15-pin Male Sub-D, (A) 1 x 15-pin Male Sub-D 1 M12 with threaded
1 x 9-pin Female Sub-D coupling nut (B)
Electrical Connection (SLAMf) Electrical Connection (SLAMf)
Electrical Connection (SLAMf) Electrical Connection (SLAMf) Electrical Connection (SLAMf) PG11 Cable Gland, 1/2” NPT (F) Conduit, M20 x 1.5 Conduit N/A
Analog I/O Analog I/O
Analog I/O Analog I/O Analog I/O 0-5 V, 1-5 V, 0-10 V, 0-20 mA, 4-20 mA N/A
Power Max./Purge Power Max./Purge
Power Max./Purge Power Max./Purge
Power Max./Purge From +13.5 Vdc to +27 Vdc From +11 Vdc to +25 Vdc
Power Requirements Watts, Max. Power Requirements Watts, Max.
Power Requirements Watts, Max. Power Requirements Watts, Max.
Power Requirements Watts, Max. Valve Orifice > 0.032”: 8.7 Watts Valve Orifice > 0.032”: 10 Watts
Valve Orifice
≤
0.032”: 5.2 Watts Valve Orifice
≤
0.032”: 7 Watts
Without Valve: 2 Watts Without Valve: 4 Watts
Voltage Set Point Input Specifications Voltage Set Point Input Specifications Voltage Set Point Input Specifications Voltage Set Point Input Specifications Voltage Set Point Input Specifications
Nominal Range Nominal Range Nominal Range Nominal Range Nominal Range 0-5 Vdc, 1-5 Vdc or 0-10 Vdc N/A
Full Range Full Range Full Range Full Range Full Range (-0.5)-11 Vdc N/A
Absolute Max. Absolute Max. Absolute Max. Absolute Max. Absolute Max. 18 V (without damage) N/A
Input Impedence Input Impedence Input Impedence Input Impedence Input Impedence >990 kOhms N/A
Current Set Point Input Specifications Current Set Point Input Specifications Current Set Point Input Specifications Current Set Point Input Specifications Current Set Point Input Specifications
Nominal Range Nominal Range Nominal Range Nominal Range Nominal Range 4-20 mA or 0-20 mA N/A
Full Range Full Range Full Range Full Range Full Range 0-22 mA N/A
Absolute Max. Absolute Max. Absolute Max. Absolute Max. Absolute Max. 24 mA (without damage) N/A
Input Impedence Input Impedence Input Impedence Input Impedence Input Impedence 100 Ohms N/A
Flow Output (Voltage) Specifications Flow Output (Voltage) Specifications Flow Output (Voltage) Specifications Flow Output (Voltage) Specifications Flow Output (Voltage) Specifications
Nominal Range Nominal Range Nominal Range Nominal Range Nominal Range 0-5 Vdc, 1-5 Vdc or 0-10 Vdc N/A
Full Range Full Range Full Range Full Range Full Range (-1)-11 Vdc N/A
Min Load Resistance Min Load Resistance Min Load Resistance Min Load Resistance Min Load Resistance 2 kOhms N/A
Flow Output (Current) Specifications Flow Output (Current) Specifications Flow Output (Current) Specifications Flow Output (Current) Specifications Flow Output (Current) Specifications
Nominal Range Nominal Range Nominal Range Nominal Range Nominal Range 0-20 mA or 4-20 mA N/A
Full Range Full Range Full Range Full Range Full Range 0-22 mA N/A
Max. Load Max. Load Max. Load Max. Load Max. Load 380 Ohms N/A
Analog I/O Alarm Ouput* Analog I/O Alarm Ouput* Analog I/O Alarm Ouput* Analog I/O Alarm Ouput* Analog I/O Alarm Ouput*
Type Type
Type Type Type Open Collector N/A
Max. Closed (On) Current Max. Closed (On) Current
Max. Closed (On) Current Max. Closed (On) Current Max. Closed (On) Current 25 mA N/A
Max. Open (Off) Leakage Max. Open (Off) Leakage
Max. Open (Off) Leakage Max. Open (Off) Leakage Max. Open (Off) Leakage 1
μ
A N/A
Max. Open (Off) Voltage Max. Open (Off) Voltage
Max. Open (Off) Voltage Max. Open (Off) Voltage Max. Open (Off) Voltage 30 Vdc N/A
Analog I/O Valve Override Signal Specifications** Analog I/O Valve Override Signal Specifications**
Analog I/O Valve Override Signal Specifications** Analog I/O Valve Override Signal Specifications** Analog I/O Valve Override Signal Specifications**
Floating/Unconnected Floating/Unconnected Floating/Unconnected Floating/Unconnected Floating/Unconnected Instrument controls valve to command set point N/A
VOR < 0.3 Vdc VOR < 0.3 Vdc VOR < 0.3 Vdc VOR < 0.3 Vdc VOR < 0.3 Vdc Valve Closed N/A
0.3 Vdc < VOR < 4.8 Vdc 0.3 Vdc < VOR < 4.8 Vdc 0.3 Vdc < VOR < 4.8 Vdc 0.3 Vdc < VOR < 4.8 Vdc 0.3 Vdc < VOR < 4.8 Vdc Undefined N/A
VOR > 4.8 Vdc VOR > 4.8 Vdc VOR > 4.8 Vdc VOR > 4.8 Vdc VOR > 4.8 Vdc Valve Open N/A
Input Impedence Input Impedence Input Impedence Input Impedence Input Impedence 60 kOhms N/A
Absolute Max. Input Absolute Max. Input Absolute Max. Input Absolute Max. Input Absolute Max. Input (-25 Vdc) < VOR < 25 Vdc (without damage) N/A
*The Alarm Output is an open collector or "contact type" that is CLOSED (on) whenever an alarm is active.
The Alarm Output may be set to indicate any one of various alarm conditions.
** The Valve Override Signal (VOR) is implemented as an analog input which measures the voltage at the input and controls the
valve based upon the measured reading as shown in this section.
*** Available on SLA5810/20/40 only.