1-2
Brooks
®
Models 0152/0154
Section 1 Introduction
Installation and Operation Manual
X-SE-0152-0154-eng
Part Number: 541C052AAG
March, 2008
1-2 Specifications
Power input
90-260 Vac, 50/60 Hz 70 W max power.
Power output
+15 V/2.9 A, -15V/1.4 A max or 24 Vdc/2.5 A max.
Signal input
Signal from flow or pressure transducer and remote setpoint. 0(1)-5 Vdc or
0(4)-20 mA .
Signal output
0(1)-5 Vdc or 0(4)-20 mA, Impedance 1 kW (minimum) or Impedance
750W (maximum)
Electrical
Two or four 15-pin D connectors for connecting the mass flow or pressure
control equipment.
One 25-pin D connector for combined remote setpoint input and output
signal, up to 4 channels.
One 15-pin D connector for connecting remote valve override control
function.
One 9-pin D connector for RS232 communication link to a PC.
Display reading
Model 0152: 2x 20 character and Model 0154: 4x 20 character display with
back lighting. Percentage full scale or actual reading.
Controls
Membrane push buttons for setpoint, blending, valve override, local/
remote control, menu selection per channel and power switch.
Materials of Construction
Housing
Anodized aluminium and steel covers: 1/2 size 19" rack cassette or table
top with optional handle.
Dimensions
1/2 size 19" rack cassette, [5.1" (130 mm) height, 8.7" (220 mm) width,
9.1" (230 mm) depth]. Table top (Refer to Figures 1-1 and 1-5).
Ambient Temperature
0 - 50°C (32-122°F)
Electrical Configuration,
(Refer to Figure 1-6).
