3-3
Brooks
®
Models 0152/0154
Section 3 Operation
Installation and Operation Manual
X-SE-0152-0154-eng
Part Number: 541C052AAG
March, 2008
3-3 Start-Up Screens
After power up, first the software version screen is displayed.
This screen gives information about the software version currently
installed. After a few seconds this screen is replaced by the flow
information screen.
3-4 Changing the Active Channel
On the display the flow information of the different channels is displayed.
After power-up channel 1 is always active. This is indicated on the display
by an “>” character after the channnel number instead of an “:” character.
All changes made via the different pushbuttons, except the Menu button,
will adjust the settings on channel 1. If the settings of another channel must
be changed, press
“Channel Selection”
and the next channel will become
active. Repeat this until the right channel is selected. This channel remains
active until “Channel Selection” is pressed again.
