1-7
Brooks
®
Models 0152/0154
Section 1 Introduction
Installation and Operation Manual
X-SE-0152-0154-eng
Part Number: 541C052AAG
March, 2008
1-3 Optional Equipment
For connection of the Brooks mass flow and pressure equipment to the
Models 0152 or 0154, the following interconnecting cables are available:
1-3-1 Connecting Flomega Series
For connecting the Models 0152 or 0154 to the Flomega series 5880 and
5890, the following cables are available:
Length 3 m (9.84 ft); part number 124Z605ZZZ
Length 6 m (19.69 ft); part number 124Z606ZZZ
1-3-2 Connecting Mass Flow and Pressure Series
For connecting the Models 0152 or 0154 to the Mass Flow Series, 5850,
5860 and Pressure Control series 5866, the following cables are available:
Via the Netherlands:
Length: 3 m (9.84 ft); part number 124Z236AAA
Length: 6 m (19.69 ft); part number 124Z237AAA
Length: 12 m (39.37 ft); part number 124Z610AAA
Via USA:
Length: 5 ft (1.52m); part number 124Z576AAA
Length: 10 ft (3.05m); part number 124Z577AAA
Length: 25 ft (7.62m); part number 124Z578AAA
Length: 50 ft (15.24m); part number 124Z579AAA
1-3-3 Connecting Smart Series
For connecting the Models 0152 or 0154 to the Smart Mass Flow Series
5850S, the following cables are available:
Length: 3 m (9.84 ft); part number 124Z893AAA
Length: 6 m (19.69 ft); part number 124Z894AAA
Length: 12 m (39.37 ft); part number 124Z895AAA
These cables are only necessary when digital communication between PC
and S series is desired, otherwise the cables mentioned in Section 1-3-2
can be used.
