3-12
Brooks
®
Models 0152/0154
Section 3 Operation
Installation and Operation Manual
X-SE-0152-0154-eng
Part Number: 541C052AAG
March, 2008
Set I/O Range and Range Selection Display
The range selection display can be accessed by selecting ‘Set mA/Volts’ in
the Menu (press the Menu button and use the up and down buttons to
select). Pressing the Menu button again will close the range selection
display.
The range selection screen looks as follows (example: channel 1 and 2 are
selected for 0 - 5 volts or 0 – 20 mA*, channel 3 and 4 are selected for 1 -
5 Volts or 4 – 20 mA*):
Input / Output range selection
In this software version change the Input/Output is selectable for a range
of 0-5V (0-20mA) or 1-5V (4-20mA) reflecting the 0-100% range.
The range selection can be:
a)
0 – 5 or 1 – 5 Volt if Voltage I/O is required.
b)
0 – 20 or 4 – 20 mA if Current I/O is required*.
* When a mA (current) I/O is required, the optional I/O board needs to be
installed.
Software Version
The software version can also be shown in normal operation. This can be
done in the menu selection “Version”. After confirmation with the Enter
key the “Version” screen is diplayed again.
