1-8
Brooks
®
Models 0152/0154
Section 1 Introduction
Installation and Operation Manual
X-SE-0152-0154-eng
Part Number: 541C052AAG
March, 2008
1-3-4 Connecting QUANTIM
The following cables are available for connection of the QUANTIM Mass
Flow Meter/Controller to the Brooks Microprocessor Control & Read-out
Unit: Model # 0152 and 0154
Length: 3ft (1m);
part number 124Z054AAA
Length: 5ft (1.5m); part number 124Z050AAA
Length: 10ft (3m);
part number 124Z051AAA
Length: 25ft (7m);
part number 124Z052AAA
Length: 50ft (15m); part number 124Z053AAA
Or in case both Flow and Density or Temperature functions have to be
made available:
Length: 5ft (1.5m); part number 124Z906ZZZ
Length: 10ft (3m);
part number 124Z907ZZZ
Length: 25ft (7m);
part number 124Z908ZZZ
Length: 50ft (15m); part number 124Z909ZZZ
1-3-5 RS-232 Communication
For connecting the Model 0152/0154 to a personal computer an RS-232
cable is available:
Length: 3 m (9.84 ft); part number 124Z901ZZZ
Note:
This cable is only required when using digital communication between
Model 0152/0154 and a personal computer (see Section 4-1).
1-4 Certifications
Approvals:
EMC Directive based on EN 50082-2 and
EN 50081-1 Low Voltage Directive based
on EN 61010-1 plus amendments
CSA-NRTL/C
based on CAN/CSA-C22.2 No. 1010.1-92
and ISA S82.01-1994
Scope of Electrical
Safety Approvals:
Indoor use
Altitude:
up to 2000m (6562 ft)
Pollution Degree:
2 (see IEC 664)
Installation category
II (see IEC 664)
Power input
100-240Vac, 50/
60Hz,100W
Ambient temperature:
0 - 50°C (32°F - 122°F)
Max. rel Humidity
80%
®
NRTL /C
