Brocade Communications Systems 415, Administrator'S Manual

Page: 204 / 228

186 Brocade Adapters Administrator’s Guide
53-1001256-01
port
B
--stats Displays the physical port-level statistics.
port_id Specifies the ID of the port for which you want to display statistical
information.
--statsclr Clears port-level statistics.
port_id Specifies the ID of the port for which you want to clear statistical information.
--query Queries and displays port-related information for a port.
port_id Specifies the ID of the port for which you want to display information.
--speed Queries or sets the port speed. The port speed can be changed dynamically
(when the port is enabled). If the port is disabled, the new port speed setting
takes effect when the port is re-enabled.
port_id Specifies the ID of the port for which you want to set the port speed.
speed Specifies the port speed. Auto-negotiate is the only supported speed value.
--dfsize Queries or sets the port’s maximum receive data field size. If you do not
specify a value, the current receive buffer size displays.
Note: The new receive data field size takes effect when the port is re-enabled.
port_id Specifies the ID of the port for which you want to set the data field size.
df_size Indicates the maximum supported receive data field size, in decimal value. If
set to auto, the driver default value displays. Possible values are 512, 1024,
2048, and 2112.
--topology Queries or sets the port topology.
port_id Specifies the ID of the port for which you want to display or set the topology.
auto|p2p|loop Specifies the topology type. Supported topology modes are as follows:
•
auto - auto-discovers the topology
•
p2p - point-to-point
•
loop
Note: The topology setting will take effect after the port - -disable and
port - -enable commands are executed.
Example
bcu port --list
Port# Type PWWN/MAC FC Addr/ Media State Spd
Eth dev
------------------------------------------------------------------------
1/0 cee 00:05:1e:8e:b6:02 -- sw CEE Linkup 10G
fcoe 10:00:00:05:1e:8e:b6:02 860b03 Linkup
eth 00:05:1e:8e:b6:04 eth2 Linkup
1/1 cee 00:05:1e:8e:b6:03 -- sw CEE Linkup 10G
fcoe 10:00:00:05:1e:8e:b6:03 860d03 Linkup
eth 00:05:1e:8e:b6:05 eth3 Linkup
2/0 fc 10:00:00:05:1e:0f:1a:b1 8c0e00 sw Linkup 4G *