Brocade Communications Systems 415 Administrator'S Manual Download Page 118

Page: 118 / 228

100

Brocade Adapters Administrator’s Guide

53-1001256-01

FCoE Statistics dialog box (CNA only)

The FCoE Statistics dialog box enables you to display statistical information related to the Fibre
Channel over Ethernet (FCoE) port.

Opening the dialog box

1. Select an FCoE port from the device tree.

2. Select Monitor > Statistics > FCoE Statistics from the main menu.

Right-click the FCoE port and select Statistics > FCoE Statistics from the list.

The FCoE Statistics dialog at the host level displays.

Fields and components

Field

Description

Keep Running Data checkbox

Click to continue running statistical data. This is useful if you want to
see a trend.

Polling Frequency in Seconds text box

Type a number for polling frequency. The range is between five and
3600 seconds and the default is five seconds.

Start Polling button

Click to manually poll the FCoE statistics.

Reset button

Click to reset all of the statistics to 0.

Date

The date the FCoE statistics were run.

rx_packets

The number of received packets.

tx_packets

The number of transmitted packets.

rx_bytes

The number of received bytes.

tx_bytes

The number of transmitted bytes

Summary of Contents for 415





































































































































































































































Search results

Summary of Contents for 415

Reviews:

Related manuals for 415

Brands by name

Popular brands

Brocade Communications Systems 415, Administrator'S Manual

Search results

Summary of Contents for 415

Reviews:

Related manuals for 415

Brands by name

Popular brands