manualshive.com logo in svg

Brocade Communications Systems 415, Administrator'S Manual

The AMI 415 is a versatile and user-friendly electronic device designed to optimize your daily operations. Enhance your experience with this innovative product by accessing its comprehensive Operation Manual. Download it for free from our website and get ready to unlock the full potential of your AMI 415.

Share
Download
background image

Brocade Adapters Administrator’s Guide

157

53-1001256-01

bios

B

bios

Enables the basic input/output system (BIOS) in preparation for Boot Over SAN. The BIOS is the 
firmware code that, when first powered on, is a type of boot loader.

NOTE

Refer to the 

Brocade Fibre Channel CNA Installation and Reference Manual

 for more information 

about configuring BIOS.

Synopsis

bcu bios --query <

port_id

> 

bcu bios --enable <

port_id

> [

-s speed

] [

-o auto

|

flash

|

firstlun

] [

-p pos

] {

-b pwwn,lun

}*

bcu bios --disable <

port_id

> 

Description

You must enable BIOS to support boot over SAN for a CEE port. If disabled, the host system cannot 
boot from Fibre Channel disk drives. The default setting for the CNA boot BIOS is enabled. BIOS 
must be enabled on only one adapter port per host in order to boot from SAN.

The port ID can be any of the following:

•

Adapter ID

•

Port ID

•

Port WWN

•

Port name

•

Port hardware path

Operands

--query

Queries the boot-over-SAN configuration.

port_id

Specifies the ID of the port for which you want to display information.

--enable

Enables the boot over SAN configuration.

port_id

Specifies the ID of the port for which you want to set the port’s boot from SAN 
attributes.

s 

speed

Specifies the port speed as auto-negotiate.

o 

auto|flash|firstlun

Specifies the following options for obtaining boot LUN information:

•

auto - Enables auto-discovery. When enabled, the boot LUN identification 
is provided by the fabric.

•

flash - The CNA obtains the boot LUN information from flash memory. 
Values are saved to flash when you configure them and save them 
through the BIOS Configuration Utility, HCM, and BCU.

•

firstlun - The host boots from the first LUN visible to the CNA that is 
discovered in the fabric.

p 

pos

Specifies the position for storing the boot LUN information in the -b pwwn, lun 
operand. The range is 0-3. The LUN information specified in position 0 is used 
first to boot from SAN, then information specified for positions 1, 2, and 3.

Summary of Contents for 415





































































































































































































































Reviews:

No comments

Related manuals for 415

Canon Scan Kiosk II User Manual preview
Scan Kiosk II
Brand: Canon Pages: 244
Keysight Technologies N5192A Getting Started Manual preview
N5192A
Brand: Keysight Technologies Pages: 31
Nextech NT-BT100 Manual preview
NT-BT100
Brand: Nextech Pages: 7
TRENDnet TEW-624UB User Manual preview
TEW-624UB
Brand: TRENDnet Pages: 21
Amedia DMA 3.1L User Manual preview
DMA 3.1L
Brand: Amedia Pages: 8
Parani Parani-SD1100 User Manual preview
Parani-SD1100
Brand: Parani Pages: 48
P+S Technik PS-IMS-F3 User Manual preview
PS-IMS-F3
Brand: P+S Technik Pages: 2
TP-Link TL-WN323G User Manual preview
TL-WN323G
Brand: TP-Link Pages: 33
Wagan TravelCharge Companion HT 3.4 User Manual preview
TravelCharge Companion HT 3.4
Brand: Wagan Pages: 16
IFM E80392 Operating Instructions Manual preview
E80392
Brand: IFM Pages: 10
Cognex IN-SIGHT Installation Reference preview
IN-SIGHT
Brand: Cognex Pages: 18
ZyXEL Communications OMNI.NET LITE Support Notes preview
OMNI.NET LITE
Brand: ZyXEL Communications Pages: 7
Hi-flying Elfin-EE1X User Manual preview
Elfin-EE1X
Brand: Hi-flying Pages: 19
Citel Portico TVA Series Installation And Configuration Manual preview
Portico TVA Series
Brand: Citel Pages: 109
HIKOKI ET 36A Handling Instructions Manual preview
ET 36A
Brand: HIKOKI Pages: 100
Excelsecu Data Technology eSecu FIDO2 Pro+ Fingerprint Key User Manual preview
eSecu FIDO2 Pro+ Fingerprint Key
Brand: Excelsecu Data Technology Pages: 29
Cables to Go 30534 User Manual preview
30534
Brand: Cables to Go Pages: 9
SSS Siedle ZTL 051-0 Product Information preview
ZTL 051-0
Brand: SSS Siedle Pages: 8

Brands by name

Popular brands

Load more brands