Brocade Communications Systems 415 Administrator'S Manual Download Page 149

Page: 149 / 228

Brocade Adapters Administrator’s Guide

131

53-1001256-01

Target Statistics dialog box (HBA and CNA)

The Target Statistics dialog box enables you to display statistical information for a selected remote
port (R_Port) or FCoE port.

Opening the dialog box

Select Monitor > Statistics > Remote port statistics > Target Statistics from the Host Connectivity
Manager.

Right-click a remote port and select Target Statistics.

Fields and components

Field

Description

Date

The date and time of the most recent reset.

WWN

The world wide name of the selected remote port.

Offlines

The remote ports that are offline.

RSCNs

The number of Fibre Channel Registered State Change Notifications
(RSCNs) received.

PLOGI Sent

The number of times port logins (when two node ports in the SAN
establish a connection between each other) occur.

PLOGI Accepts

The number of times port logins are accepted.

PLOGI Timeouts

The number of times port logins time out.

PLOGI Failed

The number of times port logins fail.

PLOGI Rejects

The number of times port logins are rejected.

PLOGI Received

The number of times port logins are received.

PRLI Received

The number of times PRLIs are received.

ADISC Sent

The number of discover address (ADISC) requests sent.

ADISC Accepts

The number of times discover address (ADISC) requests are
accepted.

ADISC Failed

The number of times discover address (ADISC) requests fail.

ADISC Rejects

The number of times discover address (ADISC) rejects.

ADISC Received

The number of times discover address (ADISC) requests are
received.

ADISC Rejected

The number of times discover address (ADISC) requests are
rejected.

LOGO Sent

The number of times logouts occur.

LOGO Accepts

The number of times logouts are accepted.

LOGO Failed

The number of times logouts fail.

LOGO Rejected

The number of times logouts are rejected.

Summary of Contents for 415





































































































































































































































Search results

Summary of Contents for 415

Reviews:

Related manuals for 415

Brands by name

Popular brands

Brocade Communications Systems 415, Administrator'S Manual

Search results

Summary of Contents for 415

Reviews:

Related manuals for 415

Brands by name

Popular brands