Broaster VF-2, Installation & Operation Manual

Page: 40 / 70

6-4
Advance to Next Preset:
Action:
Press the RESET button once.
Response:
The CYCLE COUNT display
will change to “-1” and the presets for #1
will be displayed.
Repeat the process as described. After
the presets for #9 are displayed, pressing
the RESET button again will cause the con
-
trol to return to normal operation.
PRESET PROGRAMMING METHOD 2
Set Temperature:
Action:
Press Cook Temperature But -
ton twice within 5 seconds.
Response:
Programming mode has
been entered. Flashing Temp Display reads
“###F.” (### = temperature value ie: 360F)
Action:
If desired, press keypad num -
bers to change displayed value then press
Cook Temperature Button once to enter
new value into memory.
Response:
Controller returns to idle
mode.
Set Time:
Action:
Press Cook Time Button twice
within 5 seconds.
Response:
Programming mode has
been entered. Flashing Time Display reads
“##:##.” (##:## = time value ie: 08:00)
Action:
If desired, press key pad num -
bers to change displayed value in minutes
and seconds then press Cook Time Button
once to enter new value into memory.
Response:
Controller returns to idle mo
de.
When Temperature and Time have been set
press and hold the desired preset number
button until you hear a beep. The temp and
time for that preset button is saved.
Repeat these steps for the remaining preset
buttons.
broaster.com Manual #16421 10/20 Rev 10/20