6–3
PRESET COOK MODE PROGRAMMING
PROGRAMING METHOD 1
For fryers manufactured Aug 2016 or later.
Select the temperature and time, following
the normal programing procedure. To save
these settings for a preset. Press and hold
the desired preset number for five seconds
until an audible beep is sounded.
PROGRAMMING METHOD 2
For fryers manufactured before Aug 2016.
Choose Preset Cook Cycle:
Action:
Press a button, 0 thru 9, corre-
sponding to the desired preset.
Response:
The TIME display shows
“P__X”, where X is the preset selected.
If a button is not pressed
in 10 seconds, the display
reverts to the previous display.
Action:
Press the same button again,
Response:
The TIME display shows
the preset time, the AUTO COMP LED
turns on if enabled, the TEMP display
shows the preset setpoint, and the
temperature will regulate to the new
setpoint.
PROGRAMMING PROCEDURE (PRESET
MODE)
Action:
Press and hold the TIME and
TEMP buttons simultaneously for
3 seconds.
Response:
The TIME display and
TEMP display begin flashing. The
CYCLE COUNT display show “-0”
indicating that the preset #0 values are
displayed. The preset values for the
TIME, TEMP, and AUTO COMP will be
shown on the display.
Change Cook Time:
Action:
Press the TIME button once.
Response:
The TEMP display turns
off and the TIME display flashes.
Action:
Key in the desired cook time
and press the TIME button to save the
new setting.
If a button is not pressed
in ten seconds, the
display will revert back to both the TIME
and TEMP displays flashing.
Change Cook Temperature
Action: Press the TEMP button
once.
Response:
The TIME display turns off
and the TEMP display flashes.
Action:
Key in the desired tempera-
ture setting and press the TEMP but-
ton to save the new setting.
If a button is not pressed
in 10 seconds, the display
reverts back to both the TIME and TEMP
displays flashing.
broaster.com Manual #15459 5/02 Rev: 9/16