Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 19
Broadcom Confidential and Proprietary
3.4.4 C4. MII Test
Command:
miitest
Function:
The function is identical to A2. Control Register Test. Each Register specified in
the configuration contents read only bit and read/write bit defines. The test writing zero and
one into the test bits to insure the read only bits value are not changed, and read/write bits
are changed accordingly.
Default:
Enabled.
Default Register table
The test will try to read the register configuration file ‘miireg.txt’ for the register defines. If
the file does not exists, the following table is used:
Offset
R/O Mask
R/W Mask
0x00
0x0000
0x7180
0x02
0xffff
0x0000
0x03
0xffff
0x0000
0x04
0x0000
0xffff
0x05
0xefff
0x0000
0x06
0x0001
0x0000
0x07
0x0800
0xb7ff
0x08
0xffff
0x0000
0x09
0x0000
0xff00
0x0a
0x7c00
0x0000
0x10
0x0000
0xffbf
0x11
0x3300
0x0000
0x19
0x001f
0x0000
0x1e
0x0000
0xffff
0x1f
0x0000
0xffff
3.4.5 C5. VPD Test
Command:
vpdtest
Function:
It saves the content of VPD first before perform the test. Once it is done, it writes
one of the five pattern test data, 0xff, 0xaa, 0x55, increment data, or decrement data, into
VPD memory. By default, increment data pattern is used. It writes and reads back the data
for the entire test range, and then restores the original content.
Default:
Enabled
3.4.6 C6. ASF Test
Command:
asftest
