Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 87
Broadcom Confidential and Proprietary
-p Restore NVRAM Config data between Bootcode and Selfboot
fw *
-r Skip Selfboot Patch Chip Rev check.
-v Program extended VPD.
-e Program an extended directory and block/firmware.
-t<Hex> Extended directory type (i.e 80, 81). (def=00000080).
Example:
1. Program NVRAM with contents of input file seprg.bin
0:> seprg seprg.bin
0:>seprg asffirmware.bin -a
2. Program NVRAM with APE DASH firmware dashfw.rom and pad up to 300kilo bytes.
0:>seprg –a –k300 dashfw.rom
3. Program NVRAM with APE DASH firmware dashfw.rom as APE UPDATE image and
pad up to 300kilo bytes. Padding and backup image is needed to enable out-of-band DASH
firmware update.
0:>seprg –a –b –k300 dashfw.rom
*-p option will restore NVRAM configuration data between Bootcode and selfboot firmware.
The configuration data that will be restored are listed below.
a. Wol_enable
b. Wol_Limit_10
c. Driver_wol_enable
d. Lom_design
e. Phy_auto_power_down
f. Reverse_nway
g. Disable_power_saving
h. Phy_led_mode
i. Shasta_ext_led_mode
j. Cable_sense
