Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 116
Broadcom Confidential and Proprietary
-R
Enable RS232 statistic update
-S
TCP segment test
-T<DEC>
Packet Type, 0:None, 1:Eth2, 2:802.3, 4:SNAP
-U
Use external loopback on 5714/5715
-V<HEX>
IPSEC test for IPv4/IPv6 (def=00000004)
-W
Check DMA_Write error status
-X<DEC>
Show IPSEC debug message
-Z<DEC>
Max segment size (def=0)
Example:
1. Load MAC driver and enable transmission
.
0:packet> loaddrv
Reinitializing PCI Configuration Space
Bus Number : 1
Device/Funtion : 11/0
Base Address : 0xfb010000
IRQ : 9
Bringing up MAC driver ... OK
PHY calculated ID: 60008162
BCM5702/03 Internal Phy Rev#2
Configuring BCM54xx ... Done
Determining Link Speed ... 1000Base-T Full Duplex
0:packet> blast –t
PageUP/PageDN to scroll. Ins/Del toggles refresh. ESC to exit
Total Rate
=================== ==================
Txed Packets (Ring#0) : 1007609 507523
Txed Packets (Ring#1) : 0 0
Txed Packets (Ring#2) : 0 0
Txed Packets (Ring#3) : 0 0
Tx Packets Enqed (Ring#0) : 0 0
Tx Packets Enqed (Ring#1) : 0 0
Tx Packets Enqed (Ring#2) : 0 0
Tx Packets Enqed (Ring#3) : 0 0
Rxed Packets (Ring#00) : 0 0
Rxed Packets (Ring#01) : 0 0
Rxed Packets (Ring#02) : 0 0
Rxed Packets (Ring#03) : 0 0
Rxed Packets (Ring#04) : 0 0
Rxed Packets (Ring#05) : 0 0
Rxed Packets (Ring#06) : 0 0
Rxed Packets (Ring#07) : 0 0
Rxed Packets (Ring#08) : 0 0
Rxed Packets (Ring#09) : 0 0
PageUP/PageDN to scroll. Ins/Del toggles refresh. ESC to exit
10.78 nicstats
Command:
nicstats
