Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 14
Broadcom Confidential and Proprietary
D6. MSI Test
D7. E-Switch Test (5756 and 5761E devices only)
D8. SADB Test (available on NetXtreme Controllers with hardware IPSec support)
D9. IPsec Loopback Test (available on NetXtreme Controllers with hardware IPSec support)
Group E.
E1. 1G Wire Open/Short (** ZERO LEN LB RJ45 **) Test
Group F. (valid on APE enabled NetXtreme Controllers only)
F1. Indirect APE Ctrl Register Test
F2. APE Control Register Test
F3. Indirect APE Peripheral Register Test
F4. APE Peripheral Register Test
F5. APE Scratch Pad Test
F6. APE Shared Memory Test
F7. APE Shared Memory Indirect Access Test
F8. APE Mutex Register Test
F9. APE Timers Test
Group G. (valid on APE enabled NetXtreme Controllers only)
G1. APE CPU Memory Test
G2. APE CPU Packet Test
G3. APE CPU SMBus Loopback Test
G4. APE CPU GPIO Register Test
G5. APE CPU Event Register Test
G6. APE CPU Mutex Register Test
G7. APE CPU Timers Test
G8. APE CPU GRC Reset Test
G9. APE USB Test (UEFI only)
3.1 Error Codes
The Error Codes are presented in Section 9 - ERROR MESSAGES.
3.2 Register Tests - A Group
3.2.1 A1. Indirect Register Test
Command:
regtest -i
Function:
Using indirect addressing method, writing increment data into MAC hash Register
table and read back for verification. The memory read/write is done 100 times while
increment test data.
Default:
Enabled
