Document: SLSA-MIP-5-4-0-US
Date of Issue: 05/2016
Revision: -
13-4
13.3 Removal / Installation
13.3.1
Removal of fresh air, hot air and mixture control knob
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
wrench size 14, 9/16 in
pliers, cutting pliers
see Fig. 13-3.
Disconnect the control cable on the control flap lever (3) (see Fig. 13-1) and mixture
flap lever (6) (see Fig.13
–2).
Remove the nuts (1) thus releasing the flexible housing (3) with the control knob (2).
Remove the control knob with cable from the flexible housing (3).
Fig. 13-3
Control knob
– typical
1 - Nut
2 - Control knob
3 - Bowden
13.3.2
Installation of fresh air, hot air and mixture control knob
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
wrench size 14, 9/16 in
pliers, cutting pliers
Insert the control knob (2) into the flexible housing and fasten it from both sides of the
instrument panel by means of nuts (1).
Connect the control cable with control flap lever (3) and (6) (see Fig. 13-1, Fig. 13-2).
Adjust fresh air, hot air and mixture control (see 13.4.1).
13.3.3
Removal of eyeball vents
see Fig. 13-4.
Remove glare shield (1) from the instrument panel.
Remove hose (2) from the vent (3).
Summary of Contents for S-LSA
Page 2: ......
