Document: SLSA-MIP-5-4-0-US
Date of Issue: 05/2016
Revision: -
4-6
4.3.3
Wing flap removal
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
wrench size 7/16 in
Removal of the wing flap according to the following procedure:
Open the flap in full position.
Disconnect control push rod on the flap side
Disconnect all three flap hinges.
Remove the flap from the wing.
Store the removed flap on a safe place and prevent it from damage.
4.3.4
Wing flap installation
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
wrench size
7/16“
Install the wing flap according to the following procedure:
Set the flap in to the hinges.
Insert the bolts in to the hinges and screw the nuts on them.
Connect control push rod.
Close the flap in the zero (up) position.
Perform check of the wing flaps operation and their deflections (see 6.4.4.2).
Summary of Contents for S-LSA
Page 2: ......
