Document: SLSA-MIP-5-4-0-US
Date of Issue: 05/2016
Revision: -
8-9
8.3.10
Installation of nose landing gear leg
Type of maintenance: heavy
Authorization to perform:
Repairman (LS-M) or Mechanic (A&P)
Tools needed:
wrench size 1/2 in, No.17
Follow Fig. 8-6 at installation.
Check the welds of the gear leg for occurrence of cracks and corrosion and whether the
bearings are not damaged before installing the gear leg.
Insert the gear leg (1) into the attachment brackets in gear channel (6).
Put the leg axle (4) into the brackets, insert bolts (3) and tighten them slightly.
Connect shock absorber with the shock absorber attachments (2).
Pull the Teleflex bottom end through the hole on the nose leg lever, put on it the nut and
use wrench size 22 to tight the nut. Then attach the bottom end of Teleflex rod to the
nose wheel fork. Use wrench size 10 to tight the self-locking nut. Connect the Teleflex
rod (5) with control lever (6) on the wheel fork.
Fig. 8-6
Removal / Installation of nose landing gear leg
1
– Nose gear leg
2 - Shock Absorber Attachment
3 - Gear leg attachment
bolts
– gear channel
5 - Control cables
6
– Control lever
7
– Gear channel
Summary of Contents for S-LSA
Page 2: ......
