Centipede 2
®
Module System Instructions
6
BriskHeat
®
Corporation. All rights reserved
INSTALLATION
Connecting C2MOD-C Modules to Heaters
1. Connect the 6-pin connector from the heating
jacket to the C2MOD-C unit. This
connector provides the control power
and RTD temperature sensor input.
2. Plug in the CAT-5 connectors on
each side of the module. These
connections are bi-directional, and
they supply the low voltage power
and communications for the C2MOD-
C.
Connect module to power
connections between the heaters
using plastic tie straps.