Centipede 2
®
Module System Instructions
26
BriskHeat
®
Corporation. All rights reserved
Example of Screenshot when Password Mode is Enabled
The user would need to enter a password to log-in to enter all edit
menus.
See Enter Password below to log-in
.
o
NOTE: A user will automatically be logged out if there is a period
of 10 minutes of inactivity.
•
Edit Mode:
Indicates if the user is able to edit module settings. This
mode is Enabled when Password Mode is Disabled or someone is
logged in. The mode is Disabled when Password Mode is Enabled and
someone is logged out.
•
Enter Password:
Place to enter password when password mode is
enabled. Used to log-in.
The default password is ‘briskheat’.
•
Set New Password and Confirm New Password:
Place to set a new
password when user wants to permanently change the password. A
keyboard screen appears.
Detect Zones
Getting There
Main Menu
Options / Set-up
Detect Zones
Check to make sure that all connections are made prior to using this function.
NOTE:
When all zones have been found, the screen must be touched to
complete zone identification.
