Centipede 2
®
Module System Instructions
BriskHeat
®
Corporation. All rights reserved
15
Edit a Single Zone
Basic Navigation
•
Touch the desired field to program. See below for detailed instructions.
•
Saves parameters to selected module.
•
Exits out of Single Zone edit menu without saving. Returns to
Single Zone view.
Parameter Definitions
•
Set Point:
Target temperature. Range: 0 to 325°C.
•
Low Alarm:
Low-temperature limit. Module will go into alarm condition if
sensor detects temperature below this setting.
•
High Alarm:
High-temperature limit. Module will go into alarm condition
if sensor detects temperature above this setting.
•
Unlatch One-Shot:
Toggle to ON to unlatch a latched zone. See Alarm
Latch Setup on page 27 for more details.
•
Zone Enable:
Toggle for turning on and off modules. Default is ON.