Centipede 2
®
Module System Instructions
BriskHeat
®
Corporation. All rights reserved
9
OPERATING THE C2MOD-C MODULE
Understanding the Status LED of the C2MOD-C
Each Centipede 2
®
Module provides basic status of your heater system with its
LED light found on the front.
Green:
Temperature is within the high and low limits, and no alarm
conditions exist.
Blinking Red
: An alarm condition exists. See Operator Interface for
status message.
Blinking Orange:
Module/zone is latched due to alarm latch condition.
See page 24 for Alarm Latch instructions.
Blinking Green:
Module/zone disabled.
Off:
Power is not supplied.
