Centipede 2
®
Module System Instructions
BriskHeat
®
Corporation. All rights reserved
3
Do not immerse or spray any
component of the control system
with liquid.
Keep volatile or combustible
material away from control and
heating system when in use.
Keep sharp metal objects away from
control and heating system.
Failure to observe these warnings may
result in electric shock, risk of fire, and / or
personal injury.
Inspect all components before use.
Do not use control and heating system if
any component is damaged.
Do not repair damaged or faulty control
and heating systems.
Do not crush or apply severe physical
stress to any component of system,
including cord assembly.
Unplug control and heating system when
not in use.
Failure to observe these warnings may result in
personal injury or damage to the control
system.
End-User Must Comply to the Following:
Only qualified personnel are allowed to connect electrical wiring.
All electrical wiring must follow local electrical codes and NEC Article 427.
Final installation/wiring is to be inspected by the authority that has jurisdiction in the
area where the heater and temperature control system are installed.
The end-user is responsible for providing a suitable disconnect device.
The end-user is responsible for providing a suitable over-current protection device. It is
highly recommended that a ground-fault circuit breaker be used.
The symbol above is used to call your attention to instructions concerning your personal safety. It
points out important safety
precautions. It means “
ATTENTION!
Become Alert! Your Personal
Safety is involved!” Read the message that follows and be alert to the possibility of personal injury or
death.
Immediate hazards which
WILL
result in severe personal injury or death
Hazards or unsafe practices which
COULD
result in severe personal injury or death
Hazards or unsafe practices which
COULD
result in minor personal injury or property damage
A person who has not read and understood all operating instructions is not
qualified to operate this equipment
