Centipede 2
®
Module System Instructions
BriskHeat
®
Corporation. All rights reserved
17
Global Programming Parameters
Basic Navigation
•
Touch the desired field to program. See below for detailed instructions.
•
Saves parameters to selected modules. Returns to Main Menu.
•
Exits out of Global Programming menu without saving. Returns to
Main Menu.
Parameter Definitions
•
Set Point:
Target temperature. Range: 0 to 325°C.
•
Low Alarm:
Low-temperature limit. Module will go into alarm condition if
sensor detects temperature below this setting.
•
High Alarm:
High-temperature limit. Module will go into alarm condition
if sensor detects temperature above this setting.
•
Program:
Selected group of modules to globally program. Choose
between All modules, String 1, String 2, String 3, or String 4.
•
Alarm Unlatch:
Toggles the alarm latch button to reset a latched alarm.
See page 27 for more information.
•
Zone On / Off:
Toggle for globally turning on and off modules. Default
is ON.
