BRIGHT BLUE SANUS, Manual

Page: 36 / 45

©Copyright 2010 BRIGHT BLUE, LDA
35
V2016
The information in this document might be changed without previous notice
Figure 6 – Circular Menu Structure
8.2 Main Menu
The main menu shows the system status. In a normal situation, without activated
alarms, the pH set-value is shown in the upper part of the screen and the type of pH
solution and the current pH value are shown at the bottom.
Figure 7 – Main Menu without Active Alarms
The indication of an active alarm will appear on the bottom right of the screen.
Figure 8 – Main Menu with an Active Alarm
8.3 Menu On / Off
This is the menu used to switch the equipment on and off. When on, the equipment
does the readings and pH compensation. When off the equipment will only do the
readings and the dosing pump will remain inactive.
8.4 Setup Menu
To access the configuration menu turn the control knob until the "SETUP" screen and
press the button to enter. If there is a password set, this must be entered in order to
access the menu. Enter the digits by turning the knob to the right (to increase) or to
the left (to reduce) and pressing to jump between digits. By default, the equipment
comes with the calibrated password 0001.
Main Menu
Configuration
On/Off
Calibration
Alarms