©Copyright 2010 BRIGHT BLUE, LDA
37
V2016
The information in this document might be changed without previous notice
Figure 14 – Timeout Setup
8.4.5
Type of Compensation Solution
Submenu to define the type of compensation solution used: acid (pH minus/decreaser)
or base (pH plus/increaser).
Figure 15 – Setup of Compensation Solution
8.4.6
Dosing Pump Priming
Submenu for pH dosing pump priming. Press the knob to start priming: when pressed,
the pH dosing pump is switched on and the priming procedure begins. When finished
press the knob again to stop the procedure.
Figure 16 – Dosing Pump Priming
8.4.7
Change
Password
Submenu to change or disable the predefined password. Press the knob to change the
password; the X will start blinking, enter the current password, press the knob and
enter the new password choosing the new digits by rotating the knob and then press it
to finish the procedure.
Summary of Contents for SANUS
Page 1: ...SANUS CONTROLADOR DE PH PH CONTROLER Espa ol 17 Portugu s 3 English 29...
Page 2: ......
Page 45: ......
