BRIGHT BLUE SANUS, Manual

Page: 31 / 45

©Copyright 2010 BRIGHT BLUE, LDA
30
V2016
The information in this document might be changed without previous notice
1 Wellcome
Thank you for choosing a Bright Blue equipment. We are certain you made the right
choice in purchasing the SANUS pH controller, as it is one of the most advanced
equipment of pH automatic control available in the market. The need for well treated
a pool was the motto that led us to develop this equipment in order to assure our
customers clean and healthy water at all-time.
2 Safety Instructions
This product is a combination of an electronic controller and the respective
accessories. It has been assembled and tested according to the safety measures
applied to electronic devices in the EC. It has been cleared by the quality department
within the factory.
To preserve status and guarantee operation safety, the following instructions must be
observed.
Product installation must be executed by licensed personnel only.
Electrical installation must be done according to local electrical safety regulations.
Product connection to the power line must allow total isolation (phase, neutral and
earth) to ensure safe repair and maintenance operations. All circuitry should be
shielded by a differential switch with a maximal earth fault current of 30mA.
Before turning on the controller it is recommended to verify its physical conditions as
well as the circuitry‘s. In case of installation in a warmer facility than origin leave the
controller’s door open to stabilize temperature and avoid condensation of the
electronic components.
When the controller is turned on remember to let the capacitors discharge before
handling them to avoid electric shock.