23
Treadwall M6 Pro Owner’s Manual—2017
Service Instructions
Frame Alignment
Adjust to these dimensions if the wheel is on the
right side (as shown). If the wheel is on the other
side, adjust so that there is a bit more room on
the wheel side. This will make the angle
adjustment easier. The slight angle of
misalignment will not affect the operation of the
Treadwall.
Internal X-bracing adjustment
If the internal X-bracing is too tight the panels may be restricted in their movement. If too loose,
the wall can sway from side to side.
For best function the center section of the Treadwall should hang level with both turnbuckles
approximately the same length.
TO adjust the x-bracing, remove the plastic covers at the bottom of the channels, loosen the
lock nut on the x-bracing, and then adjust until the wall is straight and level and you can not
easily move the center section from side to side.
Location of turnbuckles
P
lastic access covers
Summary of Contents for Treadwall M6 Pro
