Brewer Fitness Treadwall M6 Pro, Owner'S Manual

Page: 25 / 56

21
Treadwall M6 Pro Owner’s Manual—2017
General Maintenance
After The First Month:

Check the drive chain to make sure that it is not loose. Tighten if necessary. ( Pg. 17).

Check the coils on the angle adjuster cables. Tighten the slack that will develop. ( Pg. 30).

Check and tighten holds if necessary. They may loosen more readily as the panels adjust to
your gym.
Every 6 Months:

Lubricate the side channels ( Pg. 19) — This can be done more or less frequently depending
on usage.

Clean the Climbing holds and set new routes. ( Pg. 19)

Wipe down and clean machine.
Maintenance Schedule
How to access the inside of your Treadwall
The Treadwall wall panels are bolted to a set of chains. These two chains form a continuous
loop around the top and bottom axles. Each panel is attached to flanges mounted on the chains
with 4 Philips head bolts and 3/8” lock nuts.
Rotate the wall so that the desired panel is lined up with the access hole. Remove the cover,
then remove panel bolts and nuts. Rotate the wall downward and allow the panel to drop out at
bottom. Multiple panels can be removed in a similar manner if necessary. Rotate the wall until
the opening is at the height where service is required. Reverse this process to reattach the
panel and cover up the access hole.
Plas c access covers
Panel Bolts