The safety reset button has been added to
the blender to preserve the motor life.
The switch will be activated when the
motor becomes too hot, or the load too
heavy. The unit will cease to operate. The
switch located under the motor base will
need to be reset by depressing the red
button; this can only take place after 10
minutes. The motor will need to rest for 10
minutes before blending can resume.
•
To clean the pitcher, particularly when a
variety of food has been used, half fill the
pitcher with luke warm water and a small
amount of dishwashing soap. Switch to
either of the speed control buttons (1 or
2) and operate briefly. Switch the blender
OFF; remove the pitcher from the motor
base. Rinse and dry thoroughly.
•
Remove the lid and inner lid and wash in
warm soapy water.
•
Switch the blender OFF and then unplug
the unit. Wipe the motor base with a soft,
damp cloth.
DISASSEMBLING THE BLENDER
FOR CLEANING
Step 1.
To unlock the pitcher from the blender
base, turn the pitcher counter-clockwise
to the unlock position. Lift the pitcher off
the base.
Step 2.
Continue to turn the pitcher counter-
clockwise and unscrew with force.
Step 3.
Remove locking ring from pitcher.
CARE AND CLEANING
MOTOR PROTECTION BUTTON (RESET BUTTON)
11
10
Never immerse the motor
base in water or any
other liquid.
Reset Button
