BRAYER BR1108, Instruction Manual, Page: 9 / 80

9 EN
• The coffee maker will automatically switch to the
standby mode in 30 minutes.
ATTENTION! Every pressing of the active control
buttons is accompanied with a sound signal.
SWITCHING THE SOUND SIGNAL OFF
• To switch the sound signal off, simultaneously press
and hold the buttons (29) «PROGRAMM» and (27)
«MINUTES» for 3 seconds, the symbol (37) « » will
appear on the display.
• To switch the sound signal on, simultaneously press
and hold the buttons (29) «PROGRAMM» and (27)
«MINUTES» for 3 seconds, the symbol (37) « » on
the display will go out.
DRIP COFFEE MAKER
ATTENTION! Wash the drip coffee maker before the
first use.
• Open the lid (12) of the water tank (15) of the drip
coffee maker and fill the tank with drinking water. Do
not exceed the maximal water level mark! Close the
lid (12).
• Open the lid (11) and install the reusable filter (13) in
the filter holder (14). Make sure that the filter holder
(14) is installed properly, otherwise the lid (11) will not
close.
• Close the lid (11).
• Place the flask (18) on the tray (20), make sure that the
center of the flask (18) lid matches the anti-drip valve.
• Plug the unit in. You will hear a sound signal, and for
2 seconds all symbols will appear on the display. After
that the symbol (34) «CLOCK» will start flashing, the
symbol (31) «AM» will appear, the digital symbols (32)
will show the time «12:00». The separating dots (33) will
be flashing. One segment « » of the coffee brewing
strength symbol will glow constantly.
• To switch the coffee maker on, press the button (30)
«COFFEE ON/OFF», the button (30) lighting will light
up. The coffee maker will be switched on, and hot water
will pour in the flask (18).
• After the water dispensing stops, you will hear 3 sound
signals. The coffee maker will switch to the keep warm
mode, and the symbol (41) «TIME SINCE BREW» will
appear on the display.
• To switch the coffee maker off, press the button (30)
«COFFEE ON/OFF», and the coffee maker will be
switched off. Remove the flask (18) and pour the water
out from it. The drip coffee maker is ready for operation,
CURRENT TIME SETTING
• Plug the unit in. You will hear a sound signal, and for
2 seconds all symbols will appear on the display. After
that the symbol (34) «CLOCK» will start flashing, the
symbol (31) «AM» will appear, the digital symbols (32)
will show the time «12:00». The separating dots (33) will